How to remove the front and rear bumper of Opel VECTRA A (1989 - 1995)
21-07-2024, 23:51. Posted by: carsoftos777
-two screws under the hood, on the right side behind the air filter (needs to be removed) and the same on the left side.
-two screws at the bottom in the arches and one at the bottom corners of the bumper.
-then the central part comes off the latches.
But since the fastening option is not the most reliable plus years, it is worth looking for additional screws or screws, the location of which is known only to the one who tightened them. The plan of action is this: we unscrew everything we found in a circle and try to rip it off the latches. If it doesn’t fit somewhere, we look for additional fasteners. The factory mounting locations are shown in the figure.
Rear bumper
-open the trunk lid.
-take out the pistons and remove the rear panel trim upwards.
-under the casing, unscrew the nuts (in some models these nuts are accessible from the bottom).
-Unscrew the screws and take out the pistons in the wheel arches.
-with an assistant, release the latches in the wings.
-remove the bumper along with the amplifier towards you.
-remove the license plate light connector.
come back