How to remove the front and rear bumper of a Chrysler 200
22-06-2024, 02:05. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the screws and release the latches.
-Unscrew the screws and pull out the caps around the perimeter at the bottom.
-turn the wheels left or right, depending on which side you will disassemble.
-in the wheel arches, unscrew the screws and release the fender liners.
-behind the fender liners, Unscrew one screw on each side that secures the corners to the wings.
-with an assistant, release the latches and pull the bumper off the guides towards you.
-remove the connectors from the electrical equipment (if any).
Rear bumper
-in the wheel arches, unscrew the screws that secure the fender liners (in order not to remove the wheels, you need to use a ratchet with an attachment).
-move the fender liners to the side and unscrew the screws that secure the corners of the bumper to the wings (twisted from bottom to top).
- Unscrew the screws along the perimeter at the bottom (twisted from bottom to top).
- with an assistant, release the latches in the wings, under the rear lights and in the trunk opening.
- pull the bumper towards you.
- remove the connectors from the electrical equipment (if any).
come back