How to remove the front and rear bumper of a Chevrolet HHR
17-06-2024, 18:24. Posted by: carsoftos777
-open the hood.
-in the opening between the headlights, Unscrew the four screws.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches, take out two pistons and unscrew one screw on each side that secure the fender liners.
-take out the pistons (inserted from bottom to top) that secure the lower part.
-release the latches in the wings and next to the headlights (pull the corners toward you). If they do not give way, you need to pry off the tabs with a thin screwdriver (make sure not to damage the paint).
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, Unscrew one screw on each side.
-take out the two pistons at the bottom (inserted from bottom to top).
-in the wheel arches we take out three pistons on each side.
- unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you). If the latches do not respond, you need to press the tabs through the gap between the bumper and the fender with a thin flat screwdriver.
-remove the bumper back (make sure not to break the wires).
-remove the connectors from the electrical equipment.
come back