How to remove the front and rear bumper of a Chevrolet Cruze
17-04-2024, 02:31. Posted by: carsoftos777
-open the hood.
-under the hood, take out the pistons and Unscrew the screws that secure the upper part.
-turn the wheels to the left or right, depending on which side we will disassemble first.
-in the wheel arches we unscrew the screws that secure the fender liners and the corners of the bumper.
-(if necessary) Unscrew the screws and take out the pistons, remove the engine protection.
-unscrew the screws along the perimeter at the bottom (twisted from bottom to top).
-with an assistant, release the corners from the latches in the wings (pull towards yourself).
-pull the bumper forward (make sure not to break the wires).
-remove the connector from the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, unscrew two screws on each side and remove the rear lights.
-under the rear lights, release the latches.
-take out the caps at the bottom (inserted from bottom to top).
-Unscrew the screws in the wheel arches and release the fender liners.
- unscrew one screw on each side that secures the corners to the wings.
-with an assistant, release the latches in the wings (pull the corners toward you).
-remove the bumper from the guides back.
-remove the connectors from the electrical equipment (if any).
come back