How to remove the front and rear bumper of a Chrysler 300C, Magnum, Charger (2004-2011)
15-03-2024, 20:59. Posted by: carsoftos777
The bumpers of the Dodge Charger and Dodge Magnum are mounted in the same way as the Chrysler 300 C (2004-2011).
Depending on the year of manufacture and body type, the attachment points differ.
-open the hood.
-under the hood we take out the pistons (inserted from top to bottom) that secure the upper part.
-Unscrew the screws and pull out the caps around the perimeter at the bottom.
-turn the wheels left or right, depending on which side you will disassemble.
-in the wheel arches we take out three pistons on each side and release the fender liners.
-behind the fender liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-(depending on the body type) behind the fender liners, near the headlights, unscrew the nuts that secure the bumper to the wings.
-with an assistant, pull the bumper off the guides towards you.
-remove the connectors from the electrical equipment (if any).
-disconnect the headlight washer hoses.
Rear bumper
-open the trunk lid and take out three pistons and two stops that secure the upper part.
-in the wheel arches we take out three pistons on each side that secure the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the wings (twisted from bottom to top).
- along the perimeter in the lower part we take out the caps (inserted from bottom to top).
-with an assistant, pull the bumper off the guides towards you.
-remove the connectors from the electrical equipment (if any).
come back