How to remove the front and rear bumper of Peugeot Partner (Citroën Berlingo) (2002-2009)
13-12-2023, 02:57. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the four screws and remove the radiator grille.
-Unscrew the screws under the radiator grille.
-unscrew the screws along the perimeter of the lower part (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
-Unscrew the screws in the wheel arches and release the fender liners.
-behind the fender liners, Unscrew one nut on each side that secures the corners to the wings.
-release the latches in the wings.
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the electrical equipment (if any).
Rear bumper
-open the trunk lid (door).
-in the trunk opening, Unscrew the five screws.
-remove the rear lights.
-under the rear lights, Unscrew one screw on each side.
-in the wheel arches, unscrew the screws (twisted from bottom to top) that secure the corners to the wings.
-Unscrew the screws along the perimeter of the lower part (if any).
-carefully pull the bumper back.
come back