Главная > How To Remove Bumpers > How to remove the front and rear bumper of Renault Scenic (Grand Scenic) 4 (after 2016)

How to remove the front and rear bumper of Renault Scenic (Grand Scenic) 4 (after 2016)


13-12-2023, 02:50. Posted by: carsoftos777


-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-release the hood lock cable and release the upper part from the latches (pull up).
-from the bottom side, unscrew the eleven screws that secure the protection (two screws are hidden).
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches, Unscrew two screws on each side that secure the fender liners to the bumper.

-move the fender liners to the side and Unscrew one screw on each side that secures the corners of the bumper to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper forward (make sure not to tear the wires and hoses).
- disconnect the connectors of the electrical equipment.
-disconnect the headlight washer hoses (if equipped).

Rear bumper





-open the trunk lid.
-Unscrew two screws on each side that secure the rear lights.
-in the side trims of the trunk, open the hatches and unscrew the fasteners under them.
-remove the rear lights.
-under the rear lights, unscrew two screws and take out one piston on each side.

-in the trunk opening, pull out the trunk lid guides.
-in the wheel arches, Unscrew two screws on each side that secure the fender liners to the bumper.
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.
-from the bottom side, unscrew the screws that secure the lower part (twisted from bottom to top).

-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment.
come back