How to remove the front and rear bumper of an Acura CL
6-12-2023, 01:25. Posted by: carsoftos777
Depending on the year of manufacture, the mounting locations may differ.
-open the hood.
-under the hood, take out the pistons, release them from the latches and remove the radiator grille.
-under the radiator grille, Unscrew the screws.
-unscrew the screws along the perimeter of the lower part and take out the caps (twisted and inserted from the bottom up).
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches we release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners to the wings.
-release the latches in the wings and under the headlights (pull the corners toward you and forward).
-pull the bumper forward (make sure not to break the wires).
-remove the connectors from the fog lights (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening we take out the caps.
-take out the caps (inserted from bottom to top) at the bottom.
-in the wheel arches we take out the caps that secure the fender liners.
-release the latches in the wings (pull the corners toward you).
-release the latches under the rear lights.
-with an assistant, carefully pull the bumper back (make sure not to break the wires).
-remove the connectors from the electrical equipment.
come back