How to remove the front and rear bumper of Acura TSX (2004-2008)
24-11-2023, 01:51. Posted by: carsoftos777
-open the hood.
-under the hood we take out twelve pistons that secure the trim and the upper part.
-at the bottom, unscrew the four screws and take out the five pistons (twisted and inserted from the bottom up).
-turn out the wheels (depending on which side we will disassemble).
-in the wheel arches we release the fender liners.
-move the fender liners to the side and unscrew one screw on each side that secures the corners to the wings (twisted from bottom to top).
-release the latches in the wings (pull the corners toward you).
-release the latches under the headlights (pull the corner and pull it forward).
-with an assistant, pull the bumper forward (make sure not to break the wires).
-remove the electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, take out two plugs.
-Unscrew the screws under the plugs.
-from the bottom we take out two pistons and unscrew two screws (twisted and inserted from bottom to top).
-in the wheel arches, unscrew one screw on each side (in order not to remove the wheels, it is better to unscrew it using a ratchet with an attachment) and release the fender liners.
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
-pull the corners towards you and release the latches in the wings.
-release the latches under the rear lights and in the trunk opening (pull backwards).
-with an assistant, carefully pull the bumper back (make sure not to break the wires).
-remove the connectors from the electrical equipment (if any).
come back