How to remove the front and rear bumper of Peugeot 2008
11-11-2023, 03:01. Posted by: carsoftos777
-Unscrew the screws along the perimeter of the lower part.
-turn the wheels to the side.
-in the wheel arches, release the fender liners and unscrew the screws that secure the corners of the bumper to the wings.
-open the hood.
-under the hood, Unscrew the screws that secure the upper part.
-we release the latches in the wings and under the headlights (pull the corners towards you by the places where the front bumper is attached).
-with an assistant, carefully pull the bumper forward (make sure not to break the wires).
-remove the electrical connectors (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, Unscrew the screws.
-at the bottom, unscrew the screws (twisted from bottom to top).
-in the wheel arches, Unscrew the screws that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-we release the latches under the rear lights (if they don’t come out, you need to remove the rear lights).
-with an assistant, remove the bumper backwards (make sure not to break the wires).
-remove the connectors from the electrical equipment.
come back