How to remove the front and rear bumper of Alfa Romeo MiTo
22-10-2023, 16:29. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the four screws (twisted from top to bottom) that secure the upper part.
-Unscrew the four screws (twisted from bottom to top) that secure the lower part of the bumper.
-turn the wheels to the side.
-in the wheel arches we unscrew three screws and one on the bottom side that secure the fender liners (no need to remove).
-move the fender liners to the side and unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper forward (make sure not to break the wires).
-disconnect the fog lamp connectors.
Rear bumper
-open the trunk lid.
-in the trunk opening, near the rear lights, Unscrew two screws.
-Unscrew the six screws (twisted from bottom to top) that secure the lower part.
-in the wheel arches, unscrew three screws on each side that secure the fender liners to the bumper (it’s more convenient to unscrew with a ratchet with an attachment).
- unscrew one screw on each side (twisted from bottom to top) that secure the corners to the wings.
-release the latches in the wings (pull the corners toward you).
-with an assistant, pull the bumper back (make sure not to break the wires).
-disconnect the connectors from the license plate lighting and parking sensors (if equipped).
come back