How to remove the front and rear bumper of Renault Megane 1 (1995-2002)
16-09-2023, 20:57. Posted by: carsoftos777
-open the hood.
-Unscrew one screw under the hood (twisted from top to bottom).
-Unscrew the screws that secure the lower part of the bumper (twisted from bottom to top).
-depending on which side we will disassemble, turn the wheels out.
-in the wheel arches we release the fender liners (front part).
-behind the fender liners, Unscrew one screw on each side that secures the corners of the bumper to the wings.
-with an assistant, pull the bumper forward (make sure not to break the wires).
- disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk opening, Unscrew the three screws.
-from the bottom, between the bumper and the body, Unscrew the three screws.
-in the wheel arches, unscrew the screws that secure the fender liners (rear part).
-move the fender liners to the side and unscrew one screw on each side that secures the corners of the bumper to the wings.
-with an assistant, pull the bumper back (watch the wires).
- disconnect the connectors of the electrical equipment (if any).
come back