How to remove the front and rear bumper of a Chevrolet TrailBlazer (after 2013)
10-08-2023, 01:01. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew ten screws (spun down) that secure the trim and the top of the bumper.
-on the perimeter of the lower part, Unscrew the five screws (spun up).
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-wheel arches Unscrew two screws on each side.
-release the latches in the wings (gently pull the corners towards you).
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Rear bumper
-Open the trunk lid.
-in the opening of the trunk, Unscrew the screws.
-Unscrew the screws around the perimeter of the lower part (spun up).
-in the wheel wells, Unscrew the screws that secure the fender liner, mud flaps and bumper corners.
-release the latches in the wings (gently pull the corners towards you).
-we release the latches under the rear lights.
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
come back