How to remove front and rear bumper Acura RSX (Honda Integra) (2002-2006)
4-08-2023, 15:25. Posted by: carsoftos777
-open the hood.
-under the hood take out six caps (inserted from top to bottom) that secure the top.
-Unscrew the four screws and take out the four pistons (twisted and inserted from the bottom up) that secure the lower part to the fender liner and protection.
-depending on which side we will disassemble, turn the wheels to the side.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side that attach the corners to the wings.
-pull the corners of the bumper towards you and release the latches in the wings.
-we release the latches under the headlights.
-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights (if any).
Rear bumper
-Open the trunk lid.
-from the bottom take out two pistons.
-in the wheel wells, Unscrew two screws on each side and release the fender liner.
-for the fender liner, Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-we release the latches under the rear lights.
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment.
come back