How to remove the front and rear bumper Cadillac CTS (2008-2014)
12-07-2023, 02:55. Posted by: carsoftos777
-open the hood.
-under the hood, take out the caps and remove the trim (if any).
-under the hood, Unscrew the two screws and take out the caps that secure the top.
-around the bottom of the take out the caps and Unscrew the screws that attach the bumper to the fender liner and protection.
-turn out the wheels (depending on which side we will disassemble).
-in the wheel wells take out the caps and release the fender liner.
-for the fender liner, Unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, pull the bumper forward (be careful not to break the wires and hoses).
-remove the fog lamp connectors.
-disconnect the headlight washer hoses (if any).
Rear bumper
-on the perimeter of the lower part, Unscrew the screws.
-wheel arches take out the caps that secure the fender liner.
-move the fender liner to the side and Unscrew the screws that secure the corners of the bumper to the wings.
-we release the latches in the wings, under the rear lights and in the opening of the trunk
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
come back