How to remove the front and rear bumper Cadillac CTS (2003-2007)
6-07-2023, 20:47. Posted by: carsoftos777
-open the hood.
-under the hood, remove the trim over the grille.
-under the trim take out the caps that secure the top.
-on the perimeter of the lower part we take out the caps.
-turn out the wheels (depending on which side we will disassemble).
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew the screws that secure the corners of the bumper to the wings.
-with an assistant, pull the bumper forward (be careful not to break the wires).
-remove the fog lamp connectors.
Rear bumper
-Open the trunk lid.
-in the trunk, Unscrew the nuts, release the latches and remove the rear panel trim.
-for the trim, Unscrew the eight nuts.
-at the bottom, Unscrew the three screws.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and Unscrew the screws (spun up) that secure the corners of the bumper to the wings.
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
come back