How to remove the front and rear bumper Subaru Legacy BL, BP (Outback) (2003-2009)
3-07-2023, 23:41. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.
-release from the latches and pull out the front grille.
-turn the wheels, depending on which side we will disassemble.
-in the wheel arches release the fender liner.
-Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-take out the caps and Unscrew the screws (twisted and inserted from the bottom up) around the perimeter of the bottom.
-with an assistant, carefully pull the bumper forward from the rails.
-remove the connectors from the fog (if any).
Rear bumper
-open the trunk lid (rear door).
Sedan:
-from the trunk, behind the skins, Unscrew the nuts that secure the rear lights.
Universal:
-in the opening of the trunk, Unscrew two screws on each side that secure the rear lights.
-remove the rear lights.
-take out under the rear lights, two pistons on each side.
- along the perimeter of the lower part we take out the caps (inserted from the bottom up).
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew one screw on each side that attach the corners of the bumper to the wings.
- with an assistant, carefully pull the bumper back from the guides.
-disconnect electrical connectors (if any).
come back