How to remove front and rear bumper Skoda Superb 2 (B6)
29-06-2023, 22:07. Posted by: carsoftos777
Depending on the year of manufacture and model variant, the attachment points may differ slightly.
-under the hood, above the grille, take out the caps and remove the covers.
-near the headlights, Unscrew one screw on each side (spun down) that secure the grille.
-take out the caps around the perimeter at the bottom (inserted from the bottom up).
-Unscrew the wheels to the left or right side, depending on which side you will disassemble first.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and Unscrew two screws on each side (spun up) that attach the corners to the wings.
-near the fog lights, remove the decorative grilles (attached to the latches).
-under the decorative grilles, Unscrew one screw on each side.
-pulls the bumper from the rails towards you.
-remove the connector from the parking sensors (if any).
-if there are fog lights, remove the connector.
- if there are headlight washers, disconnect the hose and plug it with a stopper so that no liquid flows out of the reservoir.
Rear bumper
Depending on the year of manufacture and model variant, the attachment points may differ slightly.
-open the trunk lid and Unscrew two screws on each side that secure the rear lights.
-remove the rear lights by moving towards you (opposite sides of the lights are simply latched).
-Unscrew one nut on each side under the rear lights and take out the caps.
-Unscrew the screws at the bottom (spun up).
-Unscrew the screws in the wheel arches that secure the fender liner (in order not to remove the wheels it is more convenient to unscrew with a ratchet with a nozzle).
-move the fender liner to the side and take out one screw on each side (inserted from the bottom up).
-with an assistant, pull the bumper from the rails towards you.
-remove the connector from the parking sensors (if any).
-remove the connector from the license plate light.
come back