How to remove the front and rear bumper Cadillac SRX (2004-2010)
5-06-2023, 14:07. Posted by: carsoftos777
Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out six caps that secure the grille and the upper part of the bumper.
-turn the wheels to the side.
-in the wheel arches, we release the fender liner (we take out four pistons in the wheel arches and two from the side of the bottom).
-move the fender liner to the side and Unscrew the screws and nuts (spun up) that attach the corners to the wings.
-take out the caps that secure the engine protection.
-with an assistant, pull off the bumper (be careful not to break the wires).
-remove electrical connectors (if any).
Rear bumper
-Open the trunk lid.
-in the opening of the trunk, Unscrew the four screws.
-take out the caps around the perimeter of the bottom.
-in the wheel wells take out the caps and release the fender liner.
-for the fender liner, Unscrew the screws that attach the corners to the wings.
-with an assistant, pull the bumper back.
- (if any) remove the electrical connectors.
come back