How to remove the front and rear bumper Cadillac SRX (2009-2016)
5-06-2023, 02:39. Posted by: carsoftos777
Depending on the year of manufacture, the attachment points may differ.
-open the hood.
-under the hood take out the caps and remove the trim.
-under the trim, Unscrew the six screws and take out the two pistons that secure the grille and the top.
-turn the wheels to the side.
-in the wheel arches, Unscrew the screws and release the fender liner (it is not necessary to completely remove and unscrew all the screws).
-move the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners to the wings.
- unscrew the screws around the perimeter of the lower part (spun upwards).
-release the latches in the wings (pull the corners towards you) and under the headlights (pull forward).
-with an assistant, pull off the bumper (be careful not to break the wires).
-remove the connectors from the fog lights.
Rear bumper
-take out the caps around the perimeter of the bottom.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner and bumper corners.
-we release the latch in the wings (pull the corners towards you).
-we release the latches under the rear lights.
-we release the latch in the opening of the trunk.
-with an assistant, pull the bumper back.
- (if any) remove the electrical connectors.
come back