How to remove the front and rear bumper Cadillac STS
10-05-2023, 23:03. Posted by: carsoftos777
Depending on the year of manufacture and body type, the attachment points differ.
-open the hood.
-under the hood take out the caps and Unscrew the screws that secure the top.
-turn the wheels to the side.
-in the wheel arches we take out the caps and release the fender liner (no need to completely remove).
-for the fender liner, Unscrew one screw and one nut on each side that attach the corners to the wings.
-at the bottom, take out the caps that secure the protection.
-with an assistant, pull off the bumper (be careful not to break the wires).
-remove the connectors from the fog lights.
Rear bumper
-Open the trunk lid.
-in the trunk, remove the trim.
-for the casing, Unscrew the four nuts in the rear panel.
-Unscrew the screws around the perimeter of the bottom.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.
-Unscrew the screws that secure the corners of the bumper.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, pull the bumper back.
- (if any) remove the electrical connectors.
come back