How to remove front and rear bumper Peugeot 307
7-05-2023, 13:43. Posted by: carsoftos777
-open the hood.
-under the hood take out the caps (inserted from top to bottom) that secure the top.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, take out the caps and release the fender liner (the fender liner can not be completely removed).
-for the fender liner, Unscrew one screw on each side that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-pulls the bumper forward (be careful not to break the wires).
-remove the connectors from the fog lights (if any).
Rear bumper
-Open the trunk lid.
-remove the taillights (one plastic nut from the outside and one from the trunk).
-Unscrew under the rear lights, one screw on each side.
-Unscrew the screws that secure the lower part (spun up).
-in the wheel arches, we take out the caps and release the fender liner (you can not remove it completely).
-Unscrew one screw on each side that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
come back