How to remove the front and rear bumper AUDI A8 D2
1-05-2023, 00:57. Posted by: carsoftos777
-Unscrew one screw at the bottom of the bumper along the edges and remove the decorative grilles.
-under the bars, Unscrew one bolt on each side (under the inner sprocket or hexagon), which are twisted from the bottom up and attach the aluminum bumper reinforcement to the body.
-Unscrew the wheels to the left or right side, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-pulls the bumper over.
-now disconnect the connectors from the fog lights (if any).
- if there are headlight washers, disconnect the hose from the tee and plug it with a stopper so that no liquid flows out of the reservoir.
- bumper removed.
Rear bumper
The bumper rests on two bolts plus guides and is removed very simply.
-at the edges of the bumper, Unscrew the two bolts of the floor with an internal hexagon or an asterisk (spun from the bottom up), for convenience, you can remove the petticoat.
-pulls the bumper from the rails towards you.
-if you have parking sensors, remove the connectors from the sensors.
- bumper removed.
come back