How to remove front and rear bumper Peugeot 508
26-02-2023, 03:37. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the screws and take out the caps that secure the trim.
-Unscrew the screws that secure the top.
-around the perimeter of the lower part, Unscrew the screws that secure the lower part.
-depending on which side we will disassemble, turn the wheels.
-in the wheel arches, Unscrew the screws and release the fender liner (completely can not be removed).
-for the fender liner, Unscrew the screws that attach the corners to the wings.
-we release the latch in the wings (pull the corners towards you).
-pull the bumper forward (be careful not to break the wires and hoses).
-remove the connectors from the fog lights.
-(if any) disconnect the washer hoses (liquid may leak).
Rear bumper
-in the trunk in the side panels, remove the plugs.
-for the plugs, Unscrew the nuts that secure the rear lights.
-take out the rear lights.
-Unscrew the screws that secure the top.
-in the wheel arches, we release the fender liner (you can not remove it completely).
-for the fender liner, Unscrew the screws that secure the corners of the bumper to the wings.
-Unscrew the screws that secure the lower part (spun up).
-we release the latch in the wings (pull the corners towards you).
-with an assistant carefully (be careful not to break the wires) pull the bumper back.
-remove connectors from electrical equipment.
come back