How to remove front and rear bumper Alfa Romeo 147
26-02-2023, 03:35. Posted by: carsoftos777
-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the top.
-Unscrew the screws around the perimeter of the bottom.
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws that secure the fender liner (it is not necessary to remove completely).
-move the fender liner to the side and Unscrew two screws on each side (spun up) that attach the corners to the wings.
-pull the bumper forward (be careful not to break the wires and hoses).
-disconnect electrical connectors.
-disconnect the headlight washer hoses (if any).
Rear bumper
open the trunk lid.
-in the opening of the trunk, Unscrew the four screws.
-Unscrew the five screws around the perimeter of the lower part (spun up).
-Unscrew the screws in the wheel arches that secure the fender liner.
-move the fender liner to the side and Unscrew two screws on each side (spun up) that secure the corners of the bumper to the wings.
-pulls the bumper back (be careful not to break the wires).
-remove the connectors from the license plate lighting.
come back