How to remove front and rear bumper Peugeot 807 (Fiat Ulysse 2, Lancia Phedra, Citroën C8)
20-02-2023, 03:51. Posted by: carsoftos777
-open the hood.
-under the hood take out the caps that secure the top.
- around the perimeter of the lower part, unscrew the fasteners (you need to turn a quarter of a turn).
-in the wheel arches, Unscrew the screws and take out the caps, release the fender liner.
-for the fender liner, Unscrew the screws that attach the corners to the wings.
-pulls the bumper forward from the guides in the wings (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Rear bumper
-Open the trunk lid.
-in the opening of the trunk, Unscrew the five screws that secure the top.
-Unscrew the screws and nuts that secure the lower part.
-in the wheel wells, Unscrew the screws and release the fender liner.
-for the fender liner, Unscrew one screw on each side that attach the corners to the wings.
-with an assistant, gently pull the bumper back, looking so as not to break the wires.
-disconnect electrical connectors (if any).
come back