How to remove the front and rear bumper AUDI A6 C7
18-02-2023, 02:37. Posted by: carsoftos777
The bumper is removed along with the grille.
Depending on the year of manufacture and type of model, the attachment points differ slightly.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner.
-move the fender liner to the side and Unscrew one screw on each side (spun up) in the corners and one screw under the headlights (you will need a head with a nozzle).
- behind the left fender liner, disconnect the headlight washer hoses. To prevent liquid from leaking to the ground, you need to prepare a suitable container or plug.
-under the hood take out the caps and remove the trim over the grille.
-Unscrew the screws under the trim (spun down).
-Unscrew the screws around the perimeter at the bottom (spun up).
-with an assistant, tear off the corners from the latches in the wings and pull the bumper from the rails towards you.
-remove the connector from the parking sensors.
-remove the connector from the fog lights (if any).
-remove connectors from additional electrical equipment (if any, depending on the configuration of the car).
Rear bumper
-in the opening of the trunk, remove the lining of the rear lights (attached to the latches).
-under the lining, Unscrew two nuts on each side.
-take the lights to the sides and remove from the latches.
-under the rear lights, Unscrew one screw on each side and in the corners, between the bumper and fender, take out the fixing pins.
-Unscrew the screws in the wheel arches that secure the fender liner (in order not to remove the wheels it is more convenient to unscrew with a ratchet with a nozzle).
-Unscrew the screws around the perimeter at the bottom (spun up).
-with an assistant, we release the bumper from the latches in the wings and pull it off the guides towards ourselves -if there is a parking sensor, remove the connector (located under the trim in the trunk).
-remove connectors from additional electrical equipment (depending on the configuration of the car).
come back