Главная > How To Remove Bumpers > How to remove front and rear bumper Peugeot Expert (Citroën Jumpy, Fiat Scudo) (1995-2006)

How to remove front and rear bumper Peugeot Expert (Citroën Jumpy, Fiat Scudo) (1995-2006)


17-02-2023, 02:31. Posted by: carsoftos777


The bumper is removed along with the amplifier.
-open the hood.
-under the hood, Unscrew the screws, release the latches and remove the grille.

-on the perimeter of the lower part, Unscrew the screws.
-from the side of the engine compartment, Unscrew two nuts on each side that secure the amplifier to the body.

-Depending on which side we will disassemble, we unscrew the wheels.
-(if any) Unscrew the screws that attach the corners to the wings.

-(if any) release the latches in the wings (pull the corners towards you).

-pull the bumper forward from the slide (be careful not to break the wires).
-remove the connectors from the electrical equipment, if any).

Rear bumper




-in the wheel wells, Unscrew the screws that attach the corners to the wings.

-Unscrew the screws (nuts) that secure the middle part.
-carefully pull the bumper back.
come back