How to remove the front and rear bumper AUDI A1
13-02-2023, 03:59. Posted by: carsoftos777
-Unscrew the screws around the perimeter at the bottom (spun up).
-turn the wheels to the side, depending on which side you will disassemble first.
-in the wheel arches, Unscrew the screws that secure the fender liner.
-move the fender liner to the side and take out one piston (inserted from the bottom up) that attach the bumper to the wings.
-under the hood, Unscrew the three screws that
Rear bumper
-in the trunk, remove the rear trim (door lock), fastened with latches and two screws at the bottom, removed upwards.
-under the casing, remove the plugs and unscrew the nuts (you will need a ratchet with a head).
-Unscrew the screws and take out the caps around the perimeter at the bottom (spun up).
-Unscrew one screw on each side under the rear lights.
-Unscrew the screws in the wheel arches that attach the bumper to the fender liner and guides (in order not to remove the wheels it is more convenient to unscrew with a ratchet with a nozzle).
-with an assistant, pull the edges of the bumper to the sides, releasing from the latches, and pull the guides back.
-remove the connector from the parking sensors (if any).
come back