How to remove front and rear bumper BMW 5-series E39
6-02-2023, 22:45. Posted by: carsoftos777
-Unscrew the wheels left or right, depending on which side of the bumper will be unscrewed first.
-Unscrew the screws that secure the fender liner to the bumper.
-near the fog lights, remove the bars. To do this, we get two pistons on each side.
-under the gratings, Unscrew one bolt on each side (under the inner sprocket, twisted from the bottom up).
-pulls the bumper over.
-remove the connectors from the fog lights (if any).
-if there are headlight washers, disconnect the hoses from the passenger side (if there is liquid in the tank, it will flow out).
- bumper removed.
Rear bumper
-wheel arches take out the caps that attach the fender liner to the bumper.
-remove the trim of the rear panel in the trunk.
-according to the casing, Unscrew three nuts 13 on each side.
-pull the bumper towards you (in order not to scratch the paint on the wings, it is better to do this with an assistant).
-if there is a parking sensor, disconnect the connector.
- bumper removed.
come back