How to remove front and rear bumper of Chevrolet Spark (Matiz)/ Daewoo Matiz (2005-2009)
2-02-2023, 23:06. Posted by: carsoftos777
-open the hood.
-under the hood take out four pistons.
-on the perimeter of the lower part we take out the caps.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel wells, Unscrew the screws and release the fender liner.
-remove the fender liner to the side and Unscrew two screws on each side (spun up) that secure the corners of the bumper to the wings.
-pulls the bumper forward (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
Rear bumper
-Open the trunk lid.
-in the opening of the trunk, Unscrew the four screws.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew two screws on each side (spun up) that secure the corners of the bumper to the wings.
-take out the caps (inserted from the bottom up) that secure the lower part.
-remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment (if any).
come back