How to remove front and rear bumper BMW 5-series E34
2-02-2023, 04:37. Posted by: carsoftos777
-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-remove the connectors from the fog lights (if any)
-remove the temperature sensor (in the bumper grille closer to the left side).
BMW 5-series E34 front bumper mounting scheme - pull the bumper from the side rails towards ourselves.
Rear bumper
-remove the side moldings. The front half of the molding is snap-on, you need to pry it off with a screwdriver and pull it towards you. The side half of the molding is hooked, it just pulls together.
-under the moldings, Unscrew the four nuts, two on each side.
-in the wheel arches, you need to pry off the edges of the fender liner and pull them out over the edges of the bumper.
-pulls the bumper from the side rails towards you. Sometimes the guides get clogged with dirt and do not pull out, then you can turn the latches under
attaching the rear bumper of the BMW 5-series E34 with moldings and remove the bumper without guides.
come back