How to remove front and rear bumper Peugeot 3008
2-02-2023, 04:35. Posted by: carsoftos777
-open the hood.
-under the hood, under the hood, Unscrew the screws and take out the caps (twisted and inserted from top to bottom).
-we release the upper part from the latches.
-on the perimeter of the lower part, Unscrew the screws (spun up).
-turn the wheels to the side.
-(if any) release the lining of the wings from the latches.
-in the wheel arches release the fender liner.
-for the fender liner, Unscrew the screws (one or two, depending on the year) that secure the corners of the bumper to the fenders.
-we release the latches in the wings and under the headlights (pull the corners towards you).
-with an assistant, carefully pull the bumper forward (be careful not to break the wires and hoses).
-remove electrical connectors (if any).
-if there are headlight washers, disconnect the hoses (liquid may leak).
Rear bumper
-Open the trunk lid.
-in the opening of the trunk, release the clips.
-at the bottom, Unscrew the screws (spun up).
-in the wheel wells, Unscrew the screws that attach the corners to the wings.
-release the latches in the wings (pull the corners down and towards you), under the rear lights and in the opening of the trunk.
-with an assistant, remove the bumper back (be careful not to break the wires).
-remove connectors from electrical equipment.
come back