How to remove front and rear bumper Chevrolet Camaro (2009-2015)
30-01-2023, 04:25. Posted by: carsoftos777
-open the hood.
-under the hood take out six caps and Unscrew the two screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew three screws on each side that secure the fender liner.
-remove the fender liner to the side and Unscrew two screws on each side (one screwed from the bottom up and one screwed from the engine side).
-also behind the fender liner in the depth of the wing, Unscrew three screws on each side (you will need a head with an extension).
-at the bottom, Unscrew the two screws (spun up).
-with an assistant, carefully pull the bumper forward from the guides (be careful not to break the wires).
-remove connectors from electrical equipment.
Rear bumper
-Open the trunk lid.
-above the rear lights take out three pistons on each side and remove the lining.
-under the covers, remove the connectors from the rear lights.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-Unscrew the screws (spun up) that secure the corners to the wings.
-Now the bumper rests only on the latches. We pull the corner towards us, releasing the latches in the wings. Then, with an assistant, carefully pull the bumper back (we release the latches under the rear lights and in the trunk opening).
-disconnect electrical connectors (if any).
come back