How to remove the front and rear bumper Chevrolet Aveo (T200, T250)
22-01-2023, 02:43. Posted by: carsoftos777
-open the hood.
-under the hood take out the caps, Unscrew the screws that secure the top.
-turn out the wheels, depending on which side we will disassemble.
-in the wheel wells, Unscrew the screws that secure the fender liner.
-Unscrew the screws (spun up) that secure the corners to the wings.
-at the bottom, Unscrew the screws (spun up) that secure the sides.
- from the engine side, unscrew two nuts on each side that secure the amplifier to the body. You can remove the bumper without the amplifier. To do this, we take out the caps that attach the amplifier to the bumper (for this you need to remove the headlights and fog lamp covers), but with the amplifier the bumper is easier to remove.
Rear bumper
-open the trunk lid and Unscrew the screws in the opening that secure the top.
-in the trunk, remove the trim.
-(T200) Unscrew the nuts from the trunk in the rear panel.
-behind the skins, in the wings, Unscrew the screws and nuts.
-Unscrew the screws that secure the sides (spun up).
-Unscrew the screws in the wheel arches that secure the fender liner.
-for the fender liner, Unscrew the screws (spun up) that attach the corners to the wings.
-climb under the car and Unscrew two nuts on each side that secure the bumper amplifier to the rear panel. You can remove it without an amplifier, for this we remove the rear lights and pull out the caps in a circle. Correctly shoot with an amplifier.
-with an assistant, gently pull the bumper back (be careful not to break the wires).
-disconnect electrical connectors (if any).
come back