How to Remove Front and Rear Bumper Subaru Impreza (2007-2011)
6-12-2024, 04:37. Posted by: carsoftos777
-open the hood.
-under the hood, take out the pins that secure the upper part.
-take out the pins along the perimeter of the lower part (inserted from bottom to top).
-turn out the wheels depending on which side we are going to disassemble.
-in the wheel arches, take out the pins that secure the fender liners and bumper corners to the fenders.
- release the latches in the fenders (pull the corners towards you).
- carefully pull the bumper forward with an assistant (be careful not to tear the wires).
- remove the connectors from the electrical equipment (if any).
Rear bumper
- open the trunk lid (rear door).
- pull out six pins along the perimeter of the lower part (inserted from bottom to top).
- in the wheel arches, pull out the pins that secure the fender liners and bumper corners to the fenders.
-release the latches in the fenders and under the taillights (pull the corners towards you and back).
-carefully remove the bumper with an assistant.
-disconnect the parking sensor connectors (if any).
come back